Brand New!!! X-Rite Carrying Case for ColorMunki Smile (636-503)

Description

Brand New!!!
X-Rite Carrying Case for ColorMunki Smile (Part #: 636-503)
Carrying Case for ColorMunki Smile
from
X-Rite
features a zipper enclosure to protect your ColorMunki Smile while on the go. Additionally, the felt interior will help avoid scratches or damage to the ColorMunki Smile while stored within the case.
Specifications
In the Box:
Current Firmware:
1.200
Frequency:
FCC/IC model: 340.00 - 354.00  MHz North America
Channels:
32 channels
1-16 Standard Channels
17 - 32 selective Quad-Zone Triggering channels
Reverse compatible with all PocketWizard radios using Standard or Quad Zone Triggering channels
Zones:
A - B - C - D
Compatible with other PocketWizard radios with Quad-Zone Triggering channels
Antenna:
Precision tuned internal coil
Display:
Backlit 2.5cm (1.0") liquid crystal display (LCD)
Range:
Up to 500 meters (1600 feet)
(actual range is dependent on multiple factors including equipment, mode, environment, positioning, orientation and interference)
Sync Speed:
Up to 1/250 for focal plane shutters
Up to 1/500 for leaf shutters
Triggering Speed:
Up to 14.5 frames per second (FPS)
Contact Time:
62 milliseconds in normal operation
2 milliseconds in High Speed Receive (HSR) Mode
Status Indicator:
LED: Green, Amber, Red status indications
Transmit Output Power:
Less than 1 milliwatt (0.001 watt)
Power:
Two (2) AA (IEC:LR6) alkaline recommended
NiMH, NiCAD, NiZn, Lithium acceptable (these chemistries may not report battery life accurately)
USB (optional AC adapter PW-AC-USB available)
Battery Life:
Up to 50 hours (with alkaline batteries)
Max Port Sync Voltage:
300 Volts (Camera/Flash Port)
Mac Current Handling:
1.0 A peak, 0.2 A (1/5 Amp or 200 milliamp) continuous current limited
Voltage Present:
3 volts, safe for use with all digital and film cameras
USB:
USB 2.0 Mini-B Connector
Housing:
High impact plastic with captive battery door
Weight:
120 grams (4 ounces) with batteries installed
Dimensions:
Height: 13.3cm (5.25"
Width: 5.1cm (2.00")
Depth: 3.2cm (1.25")
Operating Temperature:
Above -15 degrees C (5 degrees F) and below 50 decrees C (120 degrees F)
Storage Temperature:
Above -30 degrees C (-22 degrees F) and below 85 degrees C (185 degrees F) (without batteries)
Input/Output:
3.5mm (1/8") stereo miniphone jack, hot shoe
Mounting:
Hot shoe, lanyard/D-Ring loop, 1/4-20 threaded insert
Quick Guide
Stereo 3.mm (1/8") miniphone to miniphone cable
Mono 3.5mm miniphone to locking PC cable
Stereo 3.5mm miniphone to 6.3mm (1/4") adapter
Lanyard
Operation reference sticker
RoHS Compliant:
Yes
Optional Accessories:
Isolation bar, trigger buttons, camera motor drive cables, PC cables and adapters, flash sync cables and protective case
Compartible:
Compatible for use with industry standard hot shoes, PC sync terminals, etc.  Safe 3 volts sync voltage for modern digital camera systems.
Compatible with most flashes and triggering circuits.  Can handle up to 300 volts.  See our cables and adapters section for appropriate connecting cables.
2-Stage triggering works as expected for most modern cameras when using an ACC cable.  A few exceptions are detailed below:
Plus III Operational Considerations:
1) Nikon Cameras with MC-DC2 ports do not provide half-press, or full press output through the MC-DC2 port.  This means that any camera using an N-MCDC2-ACC cable won't be able to provide the "half press your remote camera from the camera in your hand" operation when using the shutter release button.  This affects the following cameras:
D90
D7000
D5100
D5000
D3100
Note:
This does NOT impact half-press or full-press INPUT to the camera, as this works just fine with the N-MCDC2-ACC cable on a remote camera.2) Nikon Camera's with a MC-DC1 port using an NM4-ACC cable does not provide "half-press" output, but it does provide "full-press" output.  This affects the following cameras:D70s
D80
3) Compatible with flashes up to 300 Volts.
Includes:
X-Rite Carrying Case for ColorMunki Smile
WE DO SHIP INTERNATIONAL
Contact information:
VL Camera