XDS200 TI USB Debug Probe - DSP JTAG cJTag Emulator Programmer High Speed

Description

XDS200 TI USB Debug Probe - DSP JTAG cJTag Emulator Programmer High Speed
Product Description
Production Condition
Brand New
Production Name
XDS200
Model Number
Shipping
USD8
For TI CC26xx, Recommended Programmer XDS110
Buy from here:
Programmer XDS110
Description
The Spectrum Digital XDS200 is the first model of the XDS200 family of debug probes (emulators) for TI processors. The XDS200 family features a balance of low cost with good performance between the super low cost XDS100 and the high performance XDS560v2. Also, all XDS debug probes support Core and System Trace in all ARM and DSP processors that feature an Embedded Trace Buffer (ETB).
The Spectrum Digital XDS200 connects to the target board via a TI 20-pin connector (with multiple adapters for TI 14-pin, ARM 10-pin and ARM 20-pin) and to the host PC via USB2.0 High Speed (480Mbps).
The Spectrum Digital XDS200 comes in a package consisting of:
XDS200 debug pod
TI 20-pin to TI 14-pin converter adapter
TI 20-pin to ARM 20-pin converter adapter
TI 20-pin to ARM 10-pin converter adapter
USB2.0 cable
Quick start guide
Devices supported:
Basic JTAG debug supports most TI microcontrollers (except MSP430), all wireless MCUs, most DSPs (except C54x, C62x, C67x) and all ARM processors
cJTAG debug supports all CC26xx, CC2538 and CC13xx devices
Serial Wire Debug (SWD) and Serial Wire Output (SWO) are available for selected microcontrollers and wireless connectivity microcontrollers
Core and System trace are available via the ETB in selected ARM and DSP processors
For more information on the trace capabilities of a particular device please refer to its technical reference manual (TRM)
You will need:
A host PC that matches the minimum requirements of the Code Composer Studio IDE
A target board that features one of the compatible JTAG headers
You may need:
An adapter to allow connecting to target boards that features different JTAG headers
Shipping information:
Product box dimensions: 130mm x 130mm x 50mm (5.0in x 5.0in x 2.0in)
Packaged product weight: 120g (4.0oz)
Features
The XDS200 is the latest family of JTAG debug probes (emulators) for TI processors. Designed to deliver good performance and the most common features that place it between the low cost XDS100 and the high performance XDS560v2, the XDS200 is the balanced solution to debug TI microcontrollers, processors and wireless devices.
The XDS200 is designed to replace the aging XDS510 family of JTAG debuggers with higher JTAG data throughput, added support for ARM Serial Wire debug modes and reduced cost.
Following the trend for space reduction on modern TI development boards, all XDS200 variants feature a standard TI 20-pin connector as the primary JTAG connectivity to the target. In addition to that, all variants also feature modular target configuration adapters for TI and ARM standard JTAG headers (the offer of adapters varies per model).
The XDS200 supports the traditional IEEE1149.1 (JTAG), IEEE1149.7 (cJTAG) as well as ARM’s Serial Wire Debug (SWD) and Serial Wire Output (SWO) and operates with interface levels from +1.5V to 4.1V.
We have target board Bluetooth BLE CC2640
Click here to buy:
Target Board CC2640 BLE
Package Including:
1) XDS200 x 1pc
2) USB cable x 1pc
Package and Shipping Information
Packing:
bubble wrap + carton
Size: 20x10x5mm
Weight: Est.  300g
Shipping: Item will be shipped within 2 working days after full payment is received. Tracking number will be uploaded to ebay. We will ship with tracking number for all purchase over USD15. You should receive item within 2 to 4 weeks.
Please send Email to us if the parcel was not delivered after 30 days of purchase. We will follow the shipment until the parcel is delivered.